Micom 3T User Manual download pdf (Page 32)

RSS Panel

Radio Configuration Settings

The View/Change|Configuration menu, provides commands to set channel parameters, scanned

channel groups, radio options, and accessories configuration.

The functions appearing under the Configuration submenu are as follows:

Channels: To configure channels parameters such as frequencies, transmit power level,

receive AGC and the carrier insertion level.

Groups: To configure the scanned channel groups.

Channels Configuration

Type the transmit frequency

Type the receive frequency

Reports wrong frequency

Figure 16. Channel Configuration Dialog Box

Parameter Definition

Channel No. The channel number you want to configure. You may type the number in the box.

or click the vertical scroll and choose from the list.

Power Transmit power level. Select from the list.

Band The type of sideband transmission. Select from the list.

Mode The carrier reinsertion level. Select from the list.

AGC The Automatic (Receive) Gain Control mode. Select from the list.

B.W. The filter bandwidth. Select from the list.

Simplex The radio transmits and receives on the same frequencies. When you click this

Frequency option, a box appears to type the required frequency (MHz).

Frequency range: 1.6 MHz - 30 MHz, Resolution: 10 Hz

Half Duplex The radio transmits and receives on different frequencies. When you click this

Frequencies option, two boxes appear to type the required transmit (Tx) and receive (Rx)

frequency (MHz).

Transmit range: 1.6 MHz - 30 MHz

Receive range; 0.1 MHz - 30 MHz

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 60 61

No comments

Micom 3T User Manual Page 32