Micom 3T User Manual download pdf (Page 6)

Ov e rvi e w

Overview

The MICOM

3 Family

MICOM-3F, MICOM-3T and MICOM-3R are part of a family of high-performance, DSP-based, multi-

purpose HF SSB radios intended for use in voice, data and fax communications, in both mobile and

base station configurations. MICOM-3 radios can be integrated into a wide range of advanced

communication systems, including data and fax networks, VHF-UHF-microwave and telephone

interconnect, high-power (500 W and 1 kW) systems, etc.

MICOM-3 support channel scanning, and the advanced Automatic Link Establishment (ALE)

feature. ALE provides unique advantages that significantly reduce operational inconveniences

caused by the very nature of HF channels. ALE enables the MICOM-3 to automatically test all

channels on the system and then use the best working channel available whenever you call a

specific station or group of stations operating in a network. Thus, ALE ensures the best link possible

and achieve greater efficiency and reliability in communications.

The ALE main features are:

x Automatic sounding, which provides channel quality testing.

x Multiple types of calls (station call, group call, All Call (emergency call) for calling all ALE

stations simultaneously, etc.) and support for multiple nets.

x Automatic Message Display (AMD), which enables automatic dispatch of preprogrammed

messages when establishing a link with another station or stations.

x Automatic Dial, which enables automatic dialing to a pre-programmed station, including the

automatic dispatch of a preprogrammed message.

When using ALE, MICOM-3 HF-SSB radios are interoperable with any other radios supporting

FED-STD-1045Aand MIL-STD-188-141B.

For more information on the characteristics and operation of MICOM-3 radios, refer to the MICOM-

3F/3T/3R Owner’s Guide (6886867J01).

PC Control and Programming Package

The PC Control and Programming package includes the MICOM Radio Control (MRC) application, a

simple, user-friendly program that can be run on any personal computer with Microsoft Windows®

95 and later versions. To control or configure a radio, you must connect it to a serial communication

port of the personal computer (the required cable is supplied in the package).

The MRC enables remote operation of MICOM-3 radios via a personal computer, and programming

of its features and operational parameters. Programming, or customizing, personalizes a radio for

the needs of individual customers, resulting in radios with unique personalities.

This manual is targeted for anyone who wants to program features into the MICOM-3 radio, or use a

computer to control the radios.

1 2 3 4 5 6 7 8 9 10 11 ... 60 61

No comments

Micom 3T User Manual Page 6