Micom 3T User Manual download pdf (Page 47)

MI C O M- 3 PC Control & Programming Owner’s Guide

x Channel No. XX in Net No. YY selected but not programmed –The channel selected in a net

is not programmed. You can either deselect this channel in the Net Configuration/Scanned

Channels 1-100 or Scanned Channels 101-200 dialog boxes, or program this channel using

the MICOM-3 PC Control and Programming Software.

x Directory Address (‘ZZZ’) is invalid –An address can contain a string of up to 15 characters.

Valid values are upper case A-to-Z and/or 0-to-9. Retype the address in the Directory

Configuration dialog box.

x Message No. XX (‘ZZZ’) contains invalid characters –A message can contain a string of up to

90 characters. See Messages Configuration dialog box (page 37) for a list of valid characters.

Retype the message.

When there are configuration errors, the Write Device command on the File menu and the Write

Device button on the Toolbar are disabled (grayed). This command remains disabled until the errors

are corrected and the list is clear.

In order to draw your attention to the fact that you cannot download ALE parameters while there are

configuration errors, the Configuration Errors button on the Toolbar remains active as long as there

are errors in the error list. Click this button and the Configuration Check window is displayed, listing

the errors.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 60 61

No comments

Micom 3T User Manual Page 47