Micom 3T Operations Instructions Page 28

  • Download
  • Add to my manuals
  • Print
  • Page
    / 164
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 27
MICOM-3F/3T/3R HF-SSB Owner’s Guide
10
General Procedures
This section provides general procedures that will help you start using your MICOM-3 radio and get
the most of its advanced features.
Most of the activities that can be performed by you (selection of operating mode, status display,
programming, testing, etc.) are done using the keypad together with the four navigation keys (up, down,
left and right) and the front panel display.
To simplify operation, MICOM-3 uses soft keys that let you control the radio simply and efficiently,
using a menu-driven mode that guides you and helps you make the required selections.
“Menu-driven” simply means that whenever you must select a parameter, an operating mode, etc.,
you select it from a list of allowed values displayed on the front panel display, thereby reducing the
chance of error:
To make the selection, you use navigation keys to reach the desired parameter value or
operation, and then confirm the selection by pressing the ENTER key.
To let you go back to previous options, there is an ESC key.
Using the Keypad
Each key is imprinted with a numeral and several letters. These
characters are accessed in clockwise order, as follows:
A single key press enters the numeral
Two consecutive key presses enter the first letter
Three consecutive key presses enter the second letter
Four consecutive key presses enter the third letter.
Five consecutive key presses enter the fourth letter.
To enter a blank space, press
0
twice.
1
?
@
/
G
P
H
R
I
S
4
7
*
Q
JM
K
N
LO
56
T
U
V
89
AD
BE
CF
23
0
#
Y
W
Z
X
MENU
Esc
P
GPS
ALARM
When entering frequencies, use the
*
key as a decimal point, if needed. In the ALE mode, the
*
key is also used to enter the wild-card character (? or @).
Note
To enter the ampersand @ symbol, press the
#
key twice. Do not use the
1
?
@
/
key.
Example: to enter “MIKE 01”:
Press
M
N
O
6
twice (for the letter M).
Press
G
H
I
4
four times (for the letter I).
Press
J
K
L
5
three times (for the letter K).
Press
D
E
F
3
three times (for the letter E).
Press
0
twice (for the blank space).
Press
0
once (for the numeral 0).
Press
1
?
@
/
once (for the numeral 1).
Page view 27
1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 163 164

Comments to this Manuals

No comments